-
E-LTM2408 Biaxial Mat kanggo Open Mold lan Close Mold
E-LTM2408 fiberglass biaxial mat duwe 24oz kain (0°/90°) karo 3/4oz disigar mat backing.
Bobot total yaiku 32oz saben kothak persegi.Becik kanggo marine, lading angin, tank FRP, planter FRP.
Jembaré gulungan standar: 50" (1.27m).50mm-2540mm kasedhiya.
MAtex E-LTM2408 biaxial (0°/90°) fiberglass diprodhuksi dening merek JUSHI/CTG roving, kang njamin kualitas.
-
Kain lan Tikar Fiberglass (0°/+45°/90°/-45°) Segi empat
Quadraxial(0°+45°,90°,-45°) fiberglass nduweni fiberglass roving mlaku ing 0°,45°,90°,-45° directions, stitched bebarengan dening benang poliester menyang kain siji, tanpa mengaruhi struktural integritas.
Siji lapisan matras sing disigar (50g / m2-600g / m2) utawa kerudung (20g / m2-50g / m2) bisa dijahit.
-
Tri-axial (0°/+45°/-45° utawa +45°/90°/-45°) Glassfiber
Triaxial longitudinal (0°/+45°/-45°) lan Triaxial Transversal (+45°/90°/-45°) kain fiberglass yaiku tulangan komposit sing diikat jahitan sing nggabungake orientasi roving ing umume 0°/+45°/ -45° utawa +45°/90°/-45° arah (roving uga bisa diatur kanthi acak antarane ± 30° lan ± 80°) menyang kain siji.
Bobot kain tri-aksial: 450g / m2-2000g / m2.
Siji lapisan matras sing disigar (50g / m2-600g / m2) utawa kerudung (20g / m2-50g / m2) bisa dijahit.
-
Tikar Fiberglass Double Bias Anti Korosi
Fiberglass Double Bias (-45 ° / + 45 °) yaiku tulangan komposit sing diikat kanthi jahitan sing nggabungake jumlah roving terus-terusan sing padha ing arah umum +45 ° lan -45 ° menyang kain siji.(arah roving uga bisa diatur kanthi acak antarane ± 30 ° lan ± 80 °).
Konstruksi iki nawakake tulangan mati-sumbu tanpa perlu muter bahan liyane kanthi bias.Siji lapisan tikar utawa kerudung sing disigar bisa dijahit nganggo kain.
1708 fiberglass bias ganda sing paling populer.
-
1708 Double Bias
1708 fiberglass bias ganda duwe kain 17oz (+45°/-45°) kanthi backing tikar 3/4oz.
Bobot total yaiku 25oz saben kothak persegi.Becik kanggo mbangun prau, ndandani komponen komposit lan nguatake.
Jembaré gulungan standar: 50 "(1.27m), jembaré sempit kasedhiya.
MAtex 1708 fiberglass biaxial (+45°/-45°) diprodhuksi dening merek JUSHI/CTG roving karo mesin rajut merek Karl Mayer, kang njamin kualitas pinunjul.
-
Biaxial (0°/90°)
Seri fiberglass biaxial (0°/90°) yaiku tulangan non-crimp sing diikat kanthi jahitan sing kasusun saka 2 lapisan terus-terusan roving: warp(0°) lan weft (90°), total bobote antarane 300g/m2-1200g/m2.
Siji lapisan tikar disigar (100g / m2-600g / m2) utawa kudung (fiberglass utawa poliester: 20g / m2-50g / m2) bisa dijahit nganggo kain.
-
Warp Searah (0°)
Warp (0°) Longitudinal Unidirectional, bundelan utama roving fiberglass dijahit ing 0-degree, sing biasane bobote antarane 150g/m2–1200g/m2, lan bundelan minoritas roving dijahit ing 90-degree sing bobote antarane 30g/m2 90g/m2.
Siji lapisan saka chop mat (50g/m2-600g/m2) utawa kudung (fiberglass utawa polyester: 20g/m2-50g/m2) bisa stitched menyang kain iki.
MAtex fiberglass warp unidirectional mat dirancang kanggo menehi kekuatan dhuwur ing arah warp lan nambah efisiensi produksi.
-
Kain Serat Kaca Weft Unidirectional
90° pakan seri unidirectional melintang, kabeh bundel fiberglass roving sing stitched ing arah weft (90°), kang biasane bobot antarane 200g/m2–900g/m2.
Siji lapisan saka chop mat (100g/m2-600g/m2) utawa kudung (fiberglass utawa polyester: 20g/m2-50g/m2) bisa stitched dhateng kain iki.
Seri produk iki utamané dirancang kanggo pultrusion lan tank, pipe liner nggawe.
